Site icon 186hr

How to consult individually when making less than twenty employees redundant

In this week’s article we continue our explanation of each stage of the redundancy process. So far we have covered reviewing the business then putting a redundancy plan together, announcing the plan to all employees ‘affected’ by the proposal and some other important relevant points to consider such as the selection process for who should be made redundant from those at risk, and the differences between Individual and Group consultation.

The next stage is to consult with all affected employees regarding the proposed redundancy plan. We will cover this in two articles – today we will cover the process most often followed by SMEs, Individual consultation for a relatively small number of redundancies. Next week we’ll write about the Group consultation process that is normally used for more than around 8 redundancies for logistical reasons but is a legal requirement for 20 or more redundancies.

It is acceptable to consult individually for any number of redundancies less than twenty, although once you get above six or seven it gets a little time consuming, which is why we find that most organisations revert to Group consultation above that number.

For proposals to make less than 20 redundancies at one ‘establishment’ within any 90-day period there is no legal guidance as to how long the consultation process should last.

At 186hr we recommend a 15-day process as this has been shown to be fair both in terms of ACAS feedback, winning Tribunals and also feedback from employees who have been through the process.

Having said that, the process can be completed in as little as 7-10 days where needed and, whereas in general we would argue that doesn’t really give time for the required ‘meaningful’ consultation, there are occasions where it is appropriate.

The rest of this article will follow our recommended 15-day process but we have put together a framework for completing the process in a 7-10 day period.  If you feel that is more fitting for your business need please contact us to discuss it further.

For more details about the redundancy consultation process or redundancies in general please see our free guide 8 Steps to Making Redundancies

Alternatively, 186hr has produced a comprehensive guide to making redundancies that includes detailed explanations of how to carry out each stage of the process, model policy documents, letters and other documents that have been provided by ACAS and CIPD along with 2 hours of consultation with a highly CIPD qualified senior HR professional to help you tailor the process to your organisational needs.

Practical Guide to Making Redundancies

Our full 86 Page Guide includes:

  • Best Practice from ACAS and CIPD
  • Over 20 appendices
  • Model Policy
  • Template Letters
  • 2 Hours of Telephone Support

15 Day Individual Consultation Process

Within this process we recommend that, following the announcement meeting described in last week’s article https://186hr.co.uk/who-and-how-to-inform-employees-of-a-plan-to-make-redundancies/ there should be three consultation meetings, each approximately one week apart before making redundancy decisions.

Day 1 – First consultation meeting shortly after the announcement

As explained last week we recommend that the ‘at risk of redundancy’ letter is handed to all those whose roles are now at risk at the end of the announcement meeting. We would then start the first individual consultation meetings an hour or so afterwards. Please note there needs to be a break in between the two meetings, and the individual must be ‘invited’ to the consultation meeting in writing, which is one of the main purposes of the letter.

All three consultation meetings should be pre-planned, with the manager who is due to hold them given a briefing (and ideally some training in the process) on how to structure the meeting, that should include at least the following:

Following this and each subsequent consultation meeting, although not a legal requirement we find it is a good idea, that is appreciated by those involved, to send round to all those at risk of redundancy a Q and A document covering the alternative proposals that were raised and the company response, along with all queries that were asked with the company’s answers. Clearly you would not include any confidential queries in this document, they should remain private.

Whereas ideally all individual redundancy consultation meetings should be held face to face, and this will hopefully soon be possible following the easing of lockdown, if logistical issues mean this is difficult it is acceptable for meetings to be held over the phone or via Skype, Zoom etc. with the details later confirmed in writing.

Day 7 – Second consultation meeting.

The second consultation meetings should be broadly similar to the first, with the following changes:

Again we would recommend a Q and A document is circulated amongst all ‘at risk’ employees following the second consultation meetings.

Day 14 – Third and final consultation meeting

Again, the third and final consultation meetings should be broadly similar to the first and second meetings, with the following changes:

In next week’s article we will look at the Group consultation process and then the following week we will cover the decision making process and giving notice of redundancy to all those whose roles will be made redundant, this would normally take place on day 15.

If you would like to discuss the redundancy process, or any other HR matters, further please do not hesitate to contact us

UK wide HR Consultancy

Call us today to discuss your needs or talk through your specific requirements.

  • HR Audits
  • Recruitment and Redundancies
  • Gender Pay Gap
  • HR Advice and Support
Exit mobile version